High Calibre Cnc Centre

Rajajinagar is a busy part of town and we have been tucked away in the industrial town area for quite some time. Specifically, we are over at No.9/1-E on the 6th Cross. Finding the right turn off the 4th Main can be a bit of a puzzle for people who aren't used to these narrow streets, but we like it here. It is an industrial area through and through, so there is always the hum of machines in the background and the smell of oil in the air. Our workshop is usually a bit messy with metal shavings and parts waiting to be finished, but that is just the nature of CNC work. We spend most of our hours watching the machines run or checking measurements. It gets quite loud during the middle of the day when everyone else on the block is running at full capacity too. We usually have a small group of guys working here who have been around long enough to know the quirks of every piece of equipment we own. We don't have a big reception area or anything like that. If you come by, you’ll probably find us on the shop floor or sitting at the small desk near the back. It’s a straightforward way to spend a day, just making parts and making sure the dimensions are right before the sun goes down. We just keep our heads down and do the work.