Classic Fibrotech & Composites

We are out in Talwade at number 189. It is a bit of a drive if you are coming from the main city, but this is where all the industrial shops are. Our place is mostly a big workshop filled with molds and raw materials. It can get a bit sticky with the resins we use, and there is usually a faint smell of chemicals in the air. We do not have a clean office area; it is all pretty much part of the same space. You will see us in our work clothes most of the time. We have been making these parts for years and we have a routine down. The floor is covered in scraps and dust from the sanding, but that is just how it is when you are working with composites. We do not really do much in the way of sales talk. If someone needs a part made, we just look at the specs and see if we can do it. It is a small team here, and we all know our roles. Sometimes the power goes out and we have to sit around and wait, but usually, it is just the sound of the fans and the tools. We like being out here in Talwade because there is enough room for the bigger molds. It is a practical setup for the kind of stuff we produce every single day.